WIND TURBINE ENERGY CALCULATOR
Live Wind Speed • Hub-Height Correction • Weibull AEP • Power Curve • ROI
🇮🇳 Indian City Live Wind Data
Live data is measured at 10 m height — the calculator corrects it to your rotor's hub height below.
WIND SPEED (10m)
--
DIRECTION
--
TEMPERATURE
--
WIND GUST
--
⚙️ Turbine Configuration
This is the 10m value from "Find City" or your own anemometer reading.
Height at which the wind speed above was recorded (10m for live data).
For HAWT this is treated as hub height; for VAWT it is also the blade height used in swept area.
🧭 Advanced Site & Turbine Parameters
These control the realism of the estimate — terrain roughness, cut-in/rated/cut-out speeds and system losses.
Used in the power-law wind shear model to raise wind speed to hub height.
Wind speed at which turbine first reaches rated capacity.
k≈2 is typical for most Indian inland sites; higher k = steadier wind.
HUB-HEIGHT WIND SPEED
--
m/s
ESTIMATED ROTOR RPM
--
RPM
ESTIMATED TORQUE
--
Nm
GENERATOR RPM
--
RPM
MECHANICAL POWER
--
kW
ELECTRICAL OUTPUT (NET)
--
kW
CAPACITY FACTOR
--
%
AIR DENSITY USED
--
kg/m³
CO₂ OFFSET / YEAR
--
tonnes
📈 Power Curve (0–30 m/s)
⚡ Electricity Generation
--
| Generation Per Hour (avg) | -- Units |
| Generation Per Day | -- Units |
| Generation Per Month | -- Units |
| Generation Per Year | -- Units |
💰 Financial Estimate
| Annual Electricity Value (Year 1) | -- |
| Project Cost | -- |
| Estimated Simple Payback | -- |
| Lifetime Value (with degradation) | -- |
| Net Lifetime Profit | -- |
🔧 Technical Summary
| Location | Manual Input |
| Wind Turbine | -- |
| Wind Speed (measured) | -- |
| Wind Speed (hub height) | -- |
| Capacity | -- |
| Rotor Diameter | -- |
| Rotor Height | -- |
| Generator | -- |
| Generator Efficiency | -- |
🏆 Turbine Type Comparison (at your site conditions)
| Type | Cp | TSR | Est. RPM | Net kW | Units/Year |
|---|
🤖 Turbine Analysis
--
⚠️ Important:
This calculator is a preliminary engineering estimate.
Actual wind turbine RPM, torque and electricity generation
depend on the manufacturer's power curve, rotor geometry,
blade pitch, air density, wind-speed distribution, turbulence,
hub/rotor height, generator characteristics, drivetrain losses,
controller efficiency and site conditions.
The Weibull-based annual energy figure assumes the entered wind speed is close to the long-term site average and that k represents the yearly distribution shape — it is an approximation, not a certified energy yield assessment (EYA).
1 Unit = 1 kWh. Rated turbine capacity does not mean that the turbine will continuously produce its rated power. Long-term site-specific wind assessment and the manufacturer's power curve should be used for final project design.
The Weibull-based annual energy figure assumes the entered wind speed is close to the long-term site average and that k represents the yearly distribution shape — it is an approximation, not a certified energy yield assessment (EYA).
1 Unit = 1 kWh. Rated turbine capacity does not mean that the turbine will continuously produce its rated power. Long-term site-specific wind assessment and the manufacturer's power curve should be used for final project design.
SOLAR ANAND
Wind Energy Solutions • Wind Turbine Calculator
Comments
Post a Comment